alkyd resin oval gear flow900 measurement

  alkyd resin oval gear flow900 measurement   email: porter@microflowmeter.com

Shanghai JSNMicro Flow Meter CO.,LTD is a famous manufacture who produces instruments. Itwas founded by previous Siemens engineer, Mr Stone. He devoted himself into mircoflow meter,oval gear flow meter ,coriolis mass flow meter,electromagnetic flowmeter,piston flow meter,spur gear flow meter,gear pump,gear metering pump. Ourflow meters have already occupied not only large market but our clients’hearts. JSN has already been the pronoun of automation instruments. We not onlyoffer you processing-control instruments that with high quality but also offeryou one-stop service. We are always your professional support and guarantee.Our delivery is within 3-7working days. If you have special requirments, we cancustomize for you based on your parameters and the delivery time is about 3-4weeks.



alkyd resin oval gear flow900 measurement

Onceupon a time, China"s manufacturing industry in the world"s processing plant hasalways been the "low quality" representative of the world. Inparticular, the Oval gear flow meter for automatic process control has theadvantages of large volume, large noise, small turndown ratio, , The use ofeasy to leak, instability and so on, leaving customers a headache is that manyproblems in the early stages of product does not appear, and in the event ofafter-sale is very troublesome, bothering money, these are domestic objectiveobjective existence of Oval gear flow meter Therefore, users buy Oval gear flowmeter is like buying lottery tickets, do not know sent to the installation siteOval gear flow meter is a blessing, in a sense, is a matter of course, whilethe base depth meter appeared to solve these problems in one fell swoop.

Ovalgear flow meter is a new type of volumetric flowmeter, in addition to apositive displacement flowmeter with high accuracy, the flow is not sensitiveto other advantages, there are the following advantages: Wide range, usually inthe flow meter is 10: l, and Deep flowmeter is generally 100: 1, or even 1000:1, the accuracy is still above 0.5%, suitable for high pressure flowmeasurement, the maximum pressure can reach 100Mpa, especially suitable for themeasurement of small flow, the minimum measurement limit can be 0.3ml / min ,Less affected by the viscosity characteristics of the medium, suitable for flowmeasurement under various viscosity conditions.



alkyd resin oval gear flow900 measurement

The ovalgear flow meter"s metering principle is the same as that of a generalvolumetric flow meter. The gears mesh with the fluid to be transported. Thefluid to be measured enters the chamber through the oil inlet and pushes therotor so that the fluid is continuously divided into the same volume of fluid.Oil port output. For every one rotation of the rotor, the flowmeter outputs thesame volume of fluid in the four metering chambers in the figure. By measuringthe number of revolutions of the elliptical gear rotor, the volume flow throughthe fluid can be obtained.



alkyd resin oval gear flow900 measurement

Item	model	K-factor	The minimum flow	Flow range	Connection size
Gear flow meter	CX-G0.025-P-AL	0.025ml	0.001L/Min	0.004~1 L/min	G1/8
gear flow meter	CX-G0.025-P-SS	0.025ml	0.001L/Min	0.004~1 L/min	G1/8
gear flow meter	CX-G0.04-P-AL	0.04ml	0.004L/min	0.01~2L/min	G1/4
gear flow meter	CX-G0.04-P-SS	0.04ml	0.004L/min	0.01~2L/min	G1/4
gear flow meter	CX-G0.1-P-AL	0.1ml	0.008L/min	0.02~4L/min	G3/8
gear flow meter	CX-G0.1-P-SS	0.1ml	0.008L/min	0.02~4L/min	G3/8
gear flow meter	CX-G0.2-P-AL	0.245ml	0.01L/Min	0.08~8L/min	G3/8
gear flow meter	CX-G0.2-P-SS	0.245ml	0.01L/Min	0.08~8L/min	G3/8
gear flow meter	CX-G0.4-P-AL	0.4ml	0.01L/Min	0.1~20L/min	G1/2
gear flow meter	CX-G0.4-P-SS	0.4ml	0.01L/Min	0.1~20L/min	G1/2
gear flow meter	CX-G1-P-AL	1ml	0.02L/Min	0.2~40L/min	G1/2
gear flow meter	CX-G1-P-SS	1ml	0.02L/Min	0.2~40L/min	G1/2
gear flow meter	CX-G2-P-AL	2ml	0.04L/Min	0.5-60L/min	G3/4
gear flow meter	CX-G2-P-SS	2ml	0.04L/Min	0.5-60L/min	G3/4

Remark: Hightemperature, high pressure, high frequency, special connection, specialmaterials, two-way measurement, etc. can be customized

What are the precautions for the gear flow meter?

1) When the flow exceeds the specified maximum flow rate, the Oval gear flow meter wear increases with the increase of the rotation speed, and the pressure loss increases sharply, should be avoided. Less than the minimum flow, although still able to measure, but the error increases. Flow meter The starting flow is about 2% of the maximum flow, and the normal working flow is preferably 70%-80% of the maximum flow.

2) Deep-rooted flowmeter is used with various viscosity media from 0.3 ~ 100000cps, different viscosity media will affect the range, the following single must be noted

3) The measured liquid temperature should not exceed the specified value, otherwise, the instrument can not work properly, or even stuck, the counter part is easily damaged at high temperatures. Liquid temperature changes will also cause additional errors in viscosity.